| In order to print the ring sizer
above, be sure that your printer is set to 100%. In other words, make sure
that you have not reduced the print size in 'page set up'. You can click
the image above so when you print it the rest of this page does not print
with it. You can verify that the sizer printed correctly by measuring it
with a ruler; it should measure from left to right: 3 3/8 inches.
Once you have printed the sizer,
follow these directions to find your ring size:
Method A)
Cut the ring sizer out and create
a slit over the black line next to the letter 'A'. Loop the far end through
the slit. Put the loop around your ring finger and pull the slack through.
Read the size that lines up with the slit. The ring you order will fit
exactly how the ring sizer fits around your finger at that particular size.
Method B)
Wrap a piece of loose string around
your finger. Be sure to allow for the size of your knuckle.
With a pen, mark the point on the
string where the end meets.
Using the chart, place the end of
the string on the left hand border next to the word, 'Son,' and stretch
along the sizer toward the numbers.
The pen mark will indicate your
ring size. |
